9 Best Corded 4 Inch Angle Grinders (November 2026)
The best corded 4 inch angle grinders include the SKIL 6 Amp 4-1/2-Inch Corded Angle Grinder for all-round home shop use, the AVID POWER Angle Grinder for a starter wheel kit, and the CRAFTSMAN Small Angle Grinder Tool 4-1/2 inch for long warranty cover.
On this page (9 sections)
- The best corded 4 inch angle grinders for each job
- How these corded 4 inch angle grinders compare
- How we compared these grinders
- What amp rating should you pick for a corded 4 inch angle grinder?
- Which speed matters more, rpm or amp rating?
- What should you look for in the guard and handle?
- Corded or cordless: which suits your work?
- Which discs and accessories should you budget for?
- Verdict
The best corded 4 inch angle grinder for most buyers is the SKIL 9295-01, a 6 amp tool with a tool-less guard, a vibration-reducing handle and 11,000 rpm. Choose the AVID POWER if you want discs and spare brushes in the box, the CRAFTSMAN for a longer warranty, or the AOBEN if you want to match speed to the material.
Corded grinders still earn their bench space because they run as long as your outlet does. There's no battery to swap or charge, so the whole tool budget goes into the motor, the guard and the grip.
That makes the best corded 4 inch angle grinder a matter of amp rating and fit in your hand, not pack voltage. Our picks below cover light cutting and rust removal up to heavy plate work.
Our picks at a glance
-
1
Best for all-round home shop useSKIL 6 Amp 4-1/2-Inch Corded Angle Grinder
9.7/10 our score
See it on Amazon -
2
-
3
Best for long warranty coverCRAFTSMAN Small Angle Grinder Tool 4-1/2 inch
9.6/10 our score
See it on Amazon
- 4
Check itMetabo HPT 4-1/2-Inch Angle Grinder
Best for tight spots and storage - 5
Check itMilwaukee 2880-20 M18 FUEL Cordless Angle Grinder
Best for buyers already on M18 batteries - 6
Check itDEWALT DWE4011 4-1/2 Inch Corded Angle Grinder
Best for fast material removal - 7
Check itAOBEN 1200W Angle Grinder 4-1/2 inch
Best for dialing in speed by material - 8
Check itWEN 7-Amp Angle Grinder with 4-1/2-Inch Wheel
Best for mixed wheel sizes - 9
Check itDEWALT DWE4012 4-1/2 Inch Paddle-Switch Grinder
Best for one-handed control
The best corded 4 inch angle grinders for each job
The SKIL takes the top spot for general shop use, while the rest of the list solves a specific need: a starter kit, a longer warranty, tight-space access or speed control. Decide what most of your cuts look like before you compare the extras.
SKIL 6 Amp 4-1/2-Inch Corded Angle Grinder: Best for all-round home shop use
- 6 amp motor
- 11,000 rpm
- Tool-less guard
- Vibration-reducing handle with wrench storage
A balanced 6 amp grinder with easy guard changes and a handle that keeps the wrench on the tool.
Pros
- Tool-less guard adjustment
- Wrench storage in the handle
- Heavy duty metal gear housing
Cons
- Only one handle position
SKIL's 9295-01 suits the home shop that needs one grinder to cut, grind and wire-brush without fuss. Its 6 amp motor spins at 11,000 rpm, enough for light steel, rebar and rust cleanup.
The tool-less guard is the feature you'll notice most, because you can twist it into position without hunting for a wrench. A heavy duty metal gear housing adds durability where the tool takes knocks.
The vibration-reducing handle holds the wrench in its base, so the adjustment tool stays on the grinder instead of in a drawer. The compact grip keeps the body close to your hand for better control on short cuts.
Trade-off: the handle mounts in one position, so left-handed users don't get the choice the AVID POWER and CRAFTSMAN offer. For most light and medium work, though, this is the easiest pick to live with.
AVID POWER Angle Grinder: Best for a starter wheel kit
- 7.5 amp motor
- 12,000 rpm
- 2-position side handle
- 2 cutting and 2 grinding wheels included
The fastest motor in this group, sold with discs and spare brushes so you can start work the day it arrives.
Pros
- Four wheels and two carbon brushes in the box
- 2-position handle for left or right hands
- Spindle lock for quick disc changes
Cons
- Heavier than the SKIL
AVID POWER suits the buyer who has no discs yet. The box holds two metal cutting wheels, two grinding wheels, a side handle, a guard, a spanner and spare carbon brushes, so you can cut the day it arrives.
Its 7.5 amp motor reaches 12,000 rpm, the fastest speed in this roundup. That headroom helps on long cuts and light masonry jobs, though a diamond disc for concrete is sold separately.
The 2-position side handle works for left or right hands, and the tool-free guard adjusts across several angles to throw sparks away from you. The spindle lock makes wheel changes quick.
Trade-off: at 5.1 lb it's heavier than the SKIL, so overhead work tires your arm sooner. Pick it for a first grinder with everything in the box; pick the SKIL for a lighter everyday tool.
CRAFTSMAN Small Angle Grinder Tool 4-1/2 inch: Best for long warranty cover
- 6 amp motor
- 12,000 rpm
- Tool-free guard
- 3-position handle
CRAFTSMAN backs this 6 amp grinder with a 3-year limited warranty and a handle that moves to three spots.
Pros
- 3-year limited warranty
- 3-position handle
- Contoured overmolded grip
Cons
- No discs beyond the one grinding wheel
CRAFTSMAN's CMEG100 covers buyers who want cover after the sale. It's backed by a 3-year limited warranty, the longest here, on a 6 amp motor that also spins at 12,000 rpm.
The 3-position handle gives you more grip choices than the SKIL or the DEWALT DWE4011, which matters when you change posture between flat grinding and edge work. The contoured overmolded grip keeps your palm comfortable during longer sessions.
A tool-free guard and spindle lock handle the setup chores without extra tools. It also hooks onto the VERSATRACK wall system, so it can hang out of the way in a small shop.
Trade-off: the kit includes one grinding wheel and no cutting discs, so budget for a cutting wheel if that's your main job. Choose it over the AVID POWER when warranty length matters more than a starter kit.
Metabo HPT 4-1/2-Inch Angle Grinder: Best for tight spots and storage
- 6.2 amp motor
- 12,000 rpm
- Five grinding wheels
- Hard case included
A compact grinder with a low-profile gear case and five wheels in a carrying case, handy for a crowded bench.
Pros
- Low-profile gear case
- Five grinding wheels and a case
- Forward-canted side handle
Cons
- No cutting discs in the kit
Metabo HPT's G12SR4 suits crowded benches and truck boxes. Its low-profile gear case slips closer to the work in tight spots, and the whole kit arrives with five grinding wheels and a hard case.
The 6.2 amp motor is the strongest of the 6 amp class here and runs at 12,000 rpm. A smaller grip diameter is meant to cut fatigue during long sessions, and the forward-canted side handle works for either hand.
The left-mounted slide switch has a quick-off feature, so you can stop the tool without shifting your grip. The spindle lock makes disc swaps simple.
Trade-off: the five wheels are all grinding discs, so cutting work needs separate discs. It's a smart buy if storage and access matter more than a ready-made cutting kit.
Milwaukee 2880-20 M18 FUEL Cordless Angle Grinder: Best for buyers already on M18 batteries
- Brushless motor
- 8,500 rpm
- Electronic clutch
- Anti-vibration side handle
A battery grinder worth a look if your shop already runs on M18 packs, with kickback protection built in.
Pros
- Electronic clutch for kickback protection
- Overload protection
- Compatible with all M18 batteries
Cons
- Tool only, no battery in the box
The Milwaukee 2880-20 is the cordless option here, and it earns its place for anyone already invested in M18 batteries. Its brushless motor turns at 8,500 rpm with an electronic clutch for kickback protection and overload protection for motor life.
An anti-vibration side handle helps on long grinds, and the 5/8"-11 spindle takes the same accessories as the corded picks. The No-Lock paddle switch stops the wheel when you release it.
Trade-off: this is a tool-only listing, so the price you see is for the grinder alone. You'll need M18 packs and a charger, which only makes sense if you own them already.
For a shop with no battery platform, a corded grinder costs less to get running. Our Milwaukee angle grinder guide covers the rest of the line.
DEWALT DWE4011 4-1/2 Inch Corded Angle Grinder: Best for fast material removal
- 7 amp motor
- 12,000 rpm
- One-Touch guard
- Quick-Change wheel release
A strong 7 amp motor with a guard you turn by hand and a slim body.
Pros
- 7 amp motor for heavier cuts
- One-Touch guard needs no tool
- Quick-Change wheel release
Cons
- Slide switch only; no paddle version here
DEWALT's DWE4011 suits buyers who spend more time cutting than sanding. Its 7 amp motor and 12,000 rpm deliver faster material removal than the 6 amp tools, with 1.4 hp of output.
The One-Touch guard turns by hand with no buttons or levers, and the Quick-Change wheel release removes discs without a wrench. A hex wrench replaces the spanner, and most tool boxes already hold one.
At 3.9 lb it's the lightest corded grinder in this group, and the slim body helps in extended use. The 5/8-inch 11 spindle takes a wide range of 4-1/2 inch accessories.
Trade-off: it uses a slide switch only, so there's no paddle version in this pick. If you prefer a paddle, the DWE4012 below covers it.
Our DEWALT angle grinder picks compare the rest of the range.
AOBEN 1200W Angle Grinder 4-1/2 inch: Best for dialing in speed by material
- 10 amp motor
- 11,000 rpm
- 6-speed settings
- Switch lock
Six speed settings and a 10 amp motor make this the most adjustable corded pick in the group.
Pros
- 6-speed adjustable control
- 10 amp motor for heavy-duty work
- Spindle lock for fast wheel changes
Cons
- Heavier and bulkier than the 6 amp picks
AOBEN's 1200W grinder suits buyers who work in more than one material. Six speed settings let you slow the disc for polishing and run it fast for cutting thicker metal or grinding concrete.
The 10 amp motor is the largest in this roundup and turns at 11,000 rpm. A switch lock holds the tool on for long grinds, and the spindle lock speeds up wheel changes.
The ergonomic grip works with both hands, and the 7/8-inch arbor with 5/8"-11 spindle takes common wheels. It's built for heavy-duty projects rather than occasional touch-ups.
Trade-off: it's the heaviest pick here at 5 lb, and the extra bulk makes it less pleasant for overhead or one-handed work. Pick it when speed control matters more than light weight.
Our variable speed angle grinder guide covers other speed-adjustable tools.
WEN 7-Amp Angle Grinder with 4-1/2-Inch Wheel: Best for mixed wheel sizes
- 7 amp motor
- 11,000 rpm
- Arbor adapter for 5/8 and 7/8 inch wheels
- Reversible handle
WEN includes an arbor adapter so you can run both common wheel bore sizes on one grinder.
Pros
- Fits 5/8 and 7/8 inch arbor wheels
- Reversible handle
- Two-year warranty
Cons
- No case in the box
WEN's 944 suits buyers with a mixed drawer of wheels. An arbor adapter lets it run both 5/8 and 7/8-inch bore grinding and cutting wheels, so older discs don't go to waste.
The 7 amp motor reaches 11,000 rpm, and the reversible handle mounts on either side. A lock-on side switch keeps the tool running without holding the trigger down.
The rubber grip lining helps during longer grinds, and the package includes a grinding wheel, wrench and adjustable guard. WEN backs it with a two-year warranty.
Trade-off: there's no case, and the 11,000 rpm ceiling trails the 12,000 rpm tools for the fastest cuts. Choose it when wheel compatibility and warranty length beat raw speed.
If you're weighing cordless tools at all, our cordless angle grinder buying guide explains what changes.
DEWALT DWE4012 4-1/2 Inch Paddle-Switch Grinder: Best for one-handed control
- 7.5 amp motor
- 12,000 rpm
- Paddle switch
- One-Touch guard
The paddle switch cuts power when you let go, which suits buyers who want the trigger hand to do the thinking.
Pros
- Paddle switch releases when you let go
- 7.5 amp motor
- One-Touch guard
Cons
- No slide-switch option for lock-on work
DEWALT's DWE4012 suits buyers who want the trigger hand to do the thinking. The paddle switch cuts power as soon as you let go, which is the safer choice for quick cuts and awkward angles.
Its 7.5 amp motor runs at 12,000 rpm with a One-Touch guard and Quick-Change wheel release. A low-profile jam-pot gear case adds durability and helps in tight spaces.
The 2-position removable side handle and slim body keep it comfortable in extended use. The 5/8-inch 11 spindle takes the same accessories as the DWE4011.
Trade-off: there's no lock-on slide switch, so long grinds mean holding the paddle the whole time. That's the right trade for safety-minded buyers and the wrong one for hours of flat grinding.
Pick the DWE4011 for lock-on work and this for control.
How these corded 4 inch angle grinders compare
Every pick here is a 4-1/2 inch tool, the size most buyers mean when they search for a corded 4 inch angle grinder. The table lines up the numbers that decide the job: amps, speed and what comes in the box.
| Product | Best for | Power | Speed | Weight | Our score |
|---|---|---|---|---|---|
| SKIL 6 Amp 4-1/2-Inch Corded Angle Grinder | all-round home shop use | 6 amp | 11 | 4 lb | 9.7 |
| AVID POWER Angle Grinder | a starter wheel kit | 7.5 amp | 12 | 5.1 lb | 9.7 |
| CRAFTSMAN Small Angle Grinder Tool 4-1/2 inch | long warranty cover | 6 amp | 12 | 4.6 lb | 9.6 |
| Metabo HPT 4-1/2-Inch Angle Grinder | tight spots and storage | 6.2 amp | 12 | 4 lb | 9.5 |
| Milwaukee 2880-20 M18 FUEL Cordless Angle Grinder | buyers already on M18 batteries | 18 V battery | 8 | 5 lb | 9.3 |
| DEWALT DWE4011 4-1/2 Inch Corded Angle Grinder | fast material removal | 7 amp | 12 | 3.9 lb | 8.9 |
| AOBEN 1200W Angle Grinder 4-1/2 inch | dialing in speed by material | 10 amp | 11 | 5 lb | 8.7 |
| WEN 7-Amp Angle Grinder with 4-1/2-Inch Wheel | mixed wheel sizes | 7 amp | 11 | 4.6 lb | 8.3 |
| DEWALT DWE4012 4-1/2 Inch Paddle-Switch Grinder | one-handed control | 7.5 amp | 12 | 1 lb | 8.0 |
How we compared these grinders
We started with the specs that change daily use: amp rating, top rpm, guard type and handle positions. Then we weighed what ships in the box against the price tier each tool sits in.
The score weighs specs, features and the fit with what a corded 4 inch angle grinder buyer usually needs: a tool that runs all day, takes common discs and stays controllable in the hand. Corded tools scored on motor and ergonomics; the one cordless pick scored on platform value and safety features.
No tool here was run in a shop. Our judgment rests on the published specs and the job each grinder is built for.
What amp rating should you pick for a corded 4 inch angle grinder?
For most home and light trade work, 6 to 7 amps covers cutting, grinding and rust removal. Step up to 10 amps only when your cuts are long, thick or in concrete.
The 6 amp class here includes the SKIL, CRAFTSMAN and Metabo HPT. The 7 to 7.5 amp group adds the DEWALT pair, AVID POWER and WEN.
The AOBEN sits alone at 10 amps.
More amps means more material removed per pass and less bogging in thick steel. It also means more weight and more heat in the tool.
A 6 amp grinder with a fresh disc often beats a 10 amp tool with a worn one, so keep discs sharp before chasing power.
The amp figure only tells part of the story. Horsepower and wattage in the specs show how hard the motor can push.
The SKIL runs 0.96 hp from its 720 watts, the AVID POWER 1.21 hp from 900 watts, and the DEWALT DWE4011 1.4 hp from 850 watts. A lower amp rating paired with good horsepower can still cut well in thin material.
When 6 amps is enough
Rust removal, paint stripping, sharpening blades and cutting thin sheet or rebar all sit comfortably in the 6 amp range. The lighter bodies are easier to control on vertical and overhead work.
When to choose 7 amps or more
Thick plate, long continuous cuts and concrete or masonry grinding call for more motor. The AOBEN's 10 amp motor and six speeds handle those jobs best among the corded picks.
Which speed matters more, rpm or amp rating?
Amp rating decides how much load the motor can pull through; rpm decides how fast the disc edge travels. You want both, but they serve different jobs.
The 12,000 rpm tools here (AVID POWER, CRAFTSMAN, Metabo HPT and both DEWALTs) spin the disc fastest. That helps on hard materials and thin cuts where a light touch does the work.
The 11,000 rpm group (SKIL, AOBEN and WEN) gives up a little top speed but tends to feel steadier in the hand. For general grinding the difference is small; for polished finishes it matters less than control.
If you work in several materials, a speed dial beats a higher ceiling. That's why the AOBEN's six settings earn it a spot despite its weight.
Our variable speed angle grinder guide goes deeper on when a dial pays off.
Fixed speed versus a speed dial
A fixed speed tool runs flat out every time you squeeze the switch. A six-setting dial like the AOBEN's lets you back off for polishing pads or thin cut-off wheels that hate full rpm.
Most home buyers do fine with fixed speed, but anyone who grinds aluminum or finishes stainless will want the dial.
What should you look for in the guard and handle?
A tool-free or one-touch guard is worth having on any corded grinder, because you'll move it often. A handle that suits your dominant hand and your working posture matters just as much.
The SKIL, CRAFTSMAN, AVID POWER, Metabo HPT and both DEWALTs adjust the guard without a separate tool. The SKIL and Metabo HPT keep the wrench on the tool or in the case.
The CRAFTSMAN, AVID POWER and DEWALT DWE4012 offer two or three handle positions; the SKIL and WEN keep it simpler.
Handle choice comes down to posture. A 2-position handle lets you switch sides when you change from flat grinding to edge work.
A forward-canted handle like the Metabo HPT's keeps your wrist straighter on long sessions. Pick based on how you'll hold the tool most often.
Tool-free guard versus wrench guard
Tool-free guards turn by hand in seconds, so you'll actually reposition them between cuts. Wrench guards cost less to make but tend to stay put in one spot longer than they should.
Slide switch versus paddle switch
A slide switch locks on for long grinds and suits bench work. A paddle switch releases when you let go, which is safer for quick or awkward cuts.
The DEWALT DWE4012 is the paddle pick here.
Corded or cordless: which suits your work?
Corded wins on runtime and cost per tool. Cordless wins on freedom from an outlet.
For most buyers asking about a corded 4 inch angle grinder, a corded tool is the right first purchase.
The Milwaukee 2880-20 is the only battery pick in this roundup, and it's here for people already on M18 packs. Its 8,500 rpm ceiling is lower than the corded group's 11,000 to 12,000 rpm, though its electronic clutch adds kickback protection.
A corded grinder runs as long as the job does. A cordless one asks you to manage charge and buy packs and a charger.
If you cut in a driveway or a field with no outlet, cordless earns its keep. If you work at a bench, corded gives more motor for the money.
Our cordless angle grinder buying guide explains the platform costs in full.
What you gain with a cord
Constant power, no battery swaps and a lighter tool body for the same motor size. You also avoid the cost of packs and chargers.
What you gain without one
Freedom from outlets and no cord to snag on the work. You accept lower rpm and a battery budget on top of the tool.
Which discs and accessories should you budget for?
Plan for at least one cutting disc and one grinding disc beyond what ships in the box. The pick you choose changes how much extra kit you need to buy.
The AVID POWER and Metabo HPT arrive with wheels, though Metabo HPT includes only grinding discs. The CRAFTSMAN, SKIL and WEN include a grinding wheel; the DEWALTs include a depressed center wheel.
Add cutting discs and a wire cup brush for most shops.
Check the spindle thread before buying discs. All the corded picks here use a 5/8"-11 spindle, so standard 4-1/2 inch accessories fit.
The WEN's arbor adapter adds 7/8-inch wheels to the mix. If your drawer holds odd-size wheels, that compatibility saves money.
Disc types by job
Cutting wheels are thin and made for slicing through metal without loading up. Grinding wheels are thicker and remove material from a surface.
A flap disc blends and finishes, while a wire cup brush strips rust and paint. A diamond disc handles tile, stone and concrete, but it's an extra purchase on every pick here.
What comes in each box
The AVID POWER is the fullest kit, with two cutting wheels, two grinding wheels and spare carbon brushes. The Metabo HPT adds five grinding wheels and a hard case.
The CRAFTSMAN, SKIL and WEN each ship one grinding wheel. Both DEWALTs include a depressed center wheel and a hex wrench.
The Milwaukee is tool only.
Verdict
The SKIL 9295-01 is the best corded 4 inch angle grinder for most people, with a 6 amp motor, a tool-less guard and a handle that keeps the wrench where you need it. Buy the AVID POWER for a complete starter kit, the CRAFTSMAN for the longest warranty, the Metabo HPT for tight spaces, the AOBEN for speed control or the DEWALT DWE4011 for the most cutting power in a light body.
If you want a paddle switch instead of a slide, choose the DWEALT DWE4012. If you're already on M18 batteries, the Milwaukee 2880-20 makes cordless sense.
Still weighing brands? Our DEWALT angle grinder picks and Milwaukee angle grinder guide compare the wider lines.
Our top 3 picks at a glance
-
1
Best for all-round home shop useSKIL 6 Amp 4-1/2-Inch Corded Angle Grinder
9.7/10 our score
See it on Amazon -
2
-
3
Best for long warranty coverCRAFTSMAN Small Angle Grinder Tool 4-1/2 inch
9.6/10 our score
See it on Amazon
Frequently asked questions
Is a 4 inch or 4-1/2 inch angle grinder better?
A 4-1/2 inch grinder takes more common disc sizes and leaves a little more reach on cuts. A true 4 inch model is easier to control in tight spots.
Most buyers are better served by 4-1/2 inch tools like the picks here.
How many amps do I need for cutting metal?
A 6 amp motor handles light metal cutting and rust removal. For thicker plate, long cuts or concrete work, choose 7 amps or more.
The DEWALT DWE4011 and AOBEN run 7 and 10 amps respectively.
Can I use 4-1/2 inch discs on a 4 inch grinder?
No. A disc larger than the grinder's rated wheel size can contact the guard and shatter.
Match the disc diameter to the tool, and check that the arbor bore fits the spindle before mounting.
Do corded angle grinders need a special outlet?
The 6 to 10 amp corded grinders here run on a standard 120 volt household outlet. A long extension cord can drop voltage on bigger cuts, so keep the cord short and rated for the tool's amps.
What should I wear when using an angle grinder?
Wear safety glasses and a face shield for cutting, plus hearing protection and gloves. Keep loose clothing clear of the spindle and let the disc stop fully before setting the tool down.
About this guide: Our look at corded 4 inch angle grinders draws on maker specs, materials and what owners report. See how we research.



